LED

1. Controller controls all the lights. Controlling all the lights to flash together.

2. There is main power supply Switch.

3. MCB is provided.

4. Current Sensor and indicator for each light by means of an LED based panel indicator.

5. All the lights are connected to a common solid state flasher unit with Adjustable knob to adjust the flashing rate.

6. There is a stand by flasher unit and change over switch is provided.

7. Solid state photo electric circuit is provided.

8. A switch from photo electric cell to direct mode will be provided.

9. Incoming supply 230V AC.

10. Indoor type wall mounted.

PRODUCT OVERVIEW

• Long life (1,00,000 hours i. e. 22 years in 12 hours daily burning basis).

• No requirement of replacement once fitted.

• Low power consumption (1 W at 230V AC).

• Shock and vibration proof.

• Solid state reliability.

ELECTRICAL DATA :

• Power consumption: 1 Watt max at 230V AC.

• Input voltage variability: Capable to withstand in a voltage fluctuation of 15%. • Di-electric strength: 1.2 kV.

• Insulation resistance: More than 10 Meg Ohms at 500V DC.

• Ageing: Each unit continuously tested for seven days at 300V AC for 230V AC.

Physical data:

• Body construction: Aluminium alloy.

• Lens: PMMA, P.C or PMMI.

• Terminal: B 22 Cap.

• Ingress protection: IP 54.

• Housing Colour White.

• Weight: 70 gm. (approx).

Light data:

No. of LEDs: 20 No’s. (Approx.) InP technology (AllnGaP) based LEDs. Ilumination in each & every direction over 180 degree. Emited Colour – Red.

PRODUCT OVERVIEW

LED (Light Emitting Diode) illuminated signages gives long-life (in excess of 1,00,000hours i.e. 11years in continuous burning basis) thus require no further replacement for long period, lower power consumption (less than 0.5watt at 240V AC) aesthetically pleasing.

ADVANTAGES :

• Very low power consumption (0.5watt at 240V AC)

• Provides longer life (1,00,000hours in continuous burning basis).

• Release headache of continuous maintenance.

• Aesthetically pleasing.

• Extremely thin, as compared to box signs.

• Wide range voltage availability .

• Saves more than 200 units of electricity per annum (as compared to conventional signs).

• Vibration-resistant  and shock proof characteristics.

PRODUCT OVERVIEW

LED based warning light indicators is an ideal replacement of rotating type warning light indicators and offers numerous advantages such as:

• Long life (1,00,000hours in continuous burning basis).

• Low power consumption (12W-15W at 220V AC).

• Shock and vibration proof characteristics.

• Solid state technology offers reliable and maintenance free features.

ELECTRICAL DATA :

      • Power consumption: 12-15 Watt (approx.) at 220V AC.

      • Input voltage Variability: Capable to withstand in a voltage fluctuation of 15%.

• Forward current: 100-120 Ma.

•  Di-electric strength: 1.5 KV when tested between body and terminals for one minute.

• Forward current: 100-120 Ma.

• Di-electric strength: 1.5 KV when tested between body and terminals for one minute.

• Insulation resistance: More than 10 Meg Ohms when tested at 500V DC.

• Surge protectors: (MOV) provided

• Ageing: Each unit tested at 300V AC (for 230V AC) for 24 hours.

Physical data:

• Body Construction: Corrosion free aluminium alloy with yellow epoxy paint.

• Lens: Acrylic.

• Gasket: Endless neoprene.

Light data:

• No. of LEDs: 240 No’s. Of InP technology (AllnGaP) based LEDs.

LED based warning light indicators are available in different colours such as Red/ Green/ Blue/ Yellow etc and operating voltages 12V to 220V AC or DC as per the customers requirement.

PRODUCT OVERVIEW

• Long life ( 1,00,000hours in continuous burning basis ).

• Low Power consumption (0.25Watt at 230V AC).

• Shock and vibration proof.

• Solid state reliability.

• Able to withstand in wide input voltage variation without any effect in life.

• One to one replacement with conventional incandescent push button.

‘T’ Type Push Button Actuator 

This type of actuator is available in both illuminated and non-illuminated version. The illuminated type has an integral actuator and lamp body consisting of cluster LED units rating from 24V to 240V AC or DC Switching elements such as NO or NC can be attached with a provision of 4 elements on either side.

‘S’ Type Push Button Actuator 

This type of actuator is available in both illuminated and non-illuminated version. The illuminated type has an integral actuator and lamp body consisting of cluster LED units rating form 24V to  240V AC or DC switching elements such as NO or NC can be fixed on either side of the lamp holder.

‘S’ type and ‘T’ type Push Button comes in colour of Red/ Green/ Yellow/ Blue/ Amber White/ Pure White and also in Bi-Colour combination.

PRODUCT OVERVIEW

LUMEN LED MODULES DESIGNED AND DEVELOPED BY GROUP OF HIGHLY QUALIFIED ENGINEERS, SPECIFICALLY FOR CONTROL AND INSTRUMENTATION PANELS ARE SUBSTITUTE OF CONVENTIONAL FILAMENT LAMPS AND OFFERS NUMEROUS ADVANTAGES SUCH AS:

• A LONG LIFE (IN EXCESS OF 1,00,000 HOURS IN CONTINUOUS BURNING BASIS) RELEASES HEADACHE OF MAINTENANCE.

• LOWER ENERGY CONSERVATION CHARACTERISTICS (0.5 WATT AT 240V AC)REDUCES SIGNIFICANT COST OF ENERGY, SHOCKPROOF.

• VIBRATION PROOF CONSTRUCTION GIVES-SOLID STATE RELIABILITY

• SHORT PAYBACK PERIOD (IN VIEW OF LOW POWER CONSUMPTION AND LIFE)

• LED PILOT LIGHTS ARE ABLE TO WITHSTANDING INPUT VOLTAGE VIBRATION WITHOUT ANY EFFECT IN LIFE.

THESE LED (LIGHT EMITTING DIODE) MODULES INTEGRATED WITH A CIRCUIT CAN BE DIRECTLY APPLIED TO THE MODULE.

AC OR DC, WHICH GIVES AN ILLUMINATION PERFECTLY, MAINTAINED FOR ANY PANEL LIGHT OUTPUT SUITABLE AS PER REQUIREMENT. ITS SMOOTH AND EYE SOOTHING REFLECTION IS UNIVERSALLY ACCEPTED THESE INNOVATIVE MODULES DEVELOPED BY GROUP OF ENGINEERS GIVES RELIABILITY, LOWER POWER CONSUMPTION AND COST EFFECTIVENESS.

LUMEN BRAND LED BASED PILOT LIGHT DESIGNED WITH EXCESSIVE CARE ARE MADE AVAILABLE TO THE SUITABILITY OF INDUSTRIAL ENVIRONMENT OF HIGH AMBIENT ABSORPTION AND FIRE RETARDANT BODIES, MAKES IT VIABLE AS NON IN FLAMMABILITY AND SAFETY DEVICE. IN BUILT IVP (INDUCED VOLTAGE PROTECTION) HELPS TO PROTECT MODULE FROM GLOWING DURING OFF CONDITION OF THE CONTROL PANEL FOR INDUCED OR LEAKAGE VOLTAGE.

LUMEN LED MODULES BASED ON INP (RED, ORANGE, YELLOW) / GAP(LIME GREEN), INGAN ( BLUE, PURE GREEN) TECHNOLOGY WITH A GREATER MTBF (MEAN TIME BETWEEN FAILURE).

LUMEN LED MODULE ARE AVAILABLE IN FOLLOWING CUT-OUT SIZE.

PRODUCT OVERVIEW

• MAJOR ENERGY SAVING.

• SOLID-STATE, HIGH SHOCK / VIBRATION RESISTANT.

• CONFORMS TO INDUSTRY STANDARDS.

• LAMPS CAN BE RETROFITTED INTO EXISTING TRAFFIC HOUSINGS.

• AVAILABLE IN RED, YELLOW, GREEN (WITH ARROW SIGN), RED (WITH MAN STANDING SIGN), GREEN (WITH MAN WALKING SIGN).

• VERY LOW POWER CONSUMPTION, GREATER INTENSITY.

• 12V DC FOR SOLAR POWER OPTION. ALSO AVAILABLE AT 24V, 110V AC 240V AC.

• AVAILABLE IN 300MM (12″) AND 200MM (8″) DIAMETER.

PRODUCT OVERVIEW

IT IS MANDATORY TO INDICATE ENERGIZED BUS BAR STATUS IS OVERHEAD CRANES, WHICH IS NORMALLY DONE BY CONVENTIONAL 100W FILAMENT BULBS IN INDUSTRY. CONVENTIONAL FILAMENT BULB FAILS FREQUENTLY RESULTING INCORRECT INDICATION TO THE OPERATOR. LUMEN OFFER LED BASED BUS BAR INDICATORS WITH FOLLOWING ADVANTAGES:

• LONG LIFE (1,00,000 HOURS I.E. 11 YEARS CONTINUOUS BURNING BASIS). THUS REQUIRES NO FURTHER REPLACEMENT ONCE FITTED.

• LOW POWER CONSUMPTION (5WATT AT 230V AC),SAVES ENERGY

• SHOCK AND VIBRATION PROOF.

• SOLID AND RELIABILITY.

• SHORT PAYBACK PERIOD.

• CAN WITHSTAND 15% INPUT VOLTAGE VARIATION WHICH NORMALLY REQUIRES DURING ON AND OFF OF CRANE MOTORS.

PRODUCT OVERVIEW

LED BASED ECO-TYPE LOW INTENSITY AVIATION OBSTRUCTION LIGHT IS A FIT AND FORGET SOLUTION AND PROVIDES MAINTENANCE FREE ALTERNATE SOLUTION OF CONVENTIONAL 100W INCANDESCENT LAMP OR NEON SPIRAL AVIATION OBSTRUCTION LIGHT AND CAN BE APPROPRIATE FOR MOBILE TOWER ‘ LUMEN ‘ LED BASED ECO TYPE LOW INTENSITY AVIATION LIGHT OFFERS FOLLOWING ADVANTAGES :

• LONG LIFE (50,000HOURS I.E. 11YEARS IN 12 HOURS DAILY BURNING BASIS).

• LOW POWER CONSUMPTION (6-8W ATT AT 230V AC).

• SHOCK AND VIBRATION PROOF.

• SOLID STATE RELIABILITY.

• LIGHT INTENSITY AS PER THE REQUIREMENT OF INTERNATIONAL CIVIL AVIATION ORGANIZATION(ICAO).

• ABLE TO WITHSTAND IN INPUT VOLTAGE FLUCTUATION.

PRODUCT OVERVIEW

LED BASED WARNING LIGHT INDICATOR IS AN IDEAL REPLACEMENT OF ROTATING TYPE WARNING LIGHT INDICATOR AND OFFERS NUMEROUS ADVANTAGE SUCH AS:

• LONG LIFE (1,00,000 HOURS IN CONTINUOUS BURNING BASIS.

• LOW POWER CONSUMPTION (12-15 WATT AT 220V AC)

• SHOCK AND VIBRATION PROOF CHARACTERISTICS.

• SOLID STATE TECHNOLOGY OFFER RELIABLE AND MAINTENANCE FREE FEATURE.